The tekmarNet® Wiring Centers 313, 314 and 315 have been updated to provide the ease and convenience of installing a digital thermostat using only 2 wires.

This allows for easy replacement of any heating thermostat. Thermostats use Zone Synchronization to prevent short cycling thereby extending the life of the boiler and increasing energy savings.

Featured updates to the Wiring Centers include the following:

tN2 Wiring Center 313 – Four Zone Valves
tN4 Wiring Center 315 – Six Zone Valves

• The addition of a Zone Group Pump output. When one of the four zones calls for heat, the zone grouppump is activated to provide flow while the end switch is closed to activate the boiler T-T or Outdoor Reset Control. This addition also allows the wiring center to directly replace other Zone Valve Controls.

tN2 Wiring Center 313 – Four Zone Valves
tN2 Wiring Center 314 – Four Zone Pumps

• The addition of an outdoor air sensor input. This allows the installation of an outdoor air sensor 070 (sold separately) to provide the outdoor air temperature reading on all connected thermostats..