tekmar Actuating Motor 741

Actuating Motor 741

Control Description The Actuating Motor 741 is designed to operate any of the tekmar 3-way and 4-way brass mixing valves from type 710 through to type 724. The 741 provides 6 N•m (53 in•lbs) of torque over a 90° rotation. The actuating motor rotates its output shaft whenever 24 V (ac) is applied between either the counter clockwise or clockwise terminals and the Com terminal. The motor is compatible with any control having a 24 V (ac) floating output.

Literature	—	D 741
Packaged Weight	—	1.2 lb. (520 g)
Approvals	—	CSA C US
Ambient Conditions	—	Indoor use only, 32 to 122°F (0 to 50°C), RH ≤ to 80% to 88°F (31°C), down to 50% from 104 to 122°F (40 to 50°C), Altitude <2000 m, Installation Category II, Pollution Category 2
Power Supply	—	24 V (ac), 60 Hz
Control Signal	—	24 V (ac), floating action, 1.8 VA
Angle of Rotation	—	Electrically limited to 90° shaft rotation.
Running time	—	105 seconds at 60 Hz
Maximum torque	—	6 N•m (53 in•lbs)

Quick
links:

002 003 004 005 007 011 024 031 032 033 039 040 060 062 070 071 072 073 076 077 078 079 080 081 082 083 084 090 092 132 150 152 153 155 156 157 161 162 256 257 260 261 262 263 264 265 268 269 270 279 325 326 335 336 337 345 346 356 360 361 362 363 364 365 369 374 420 421 422 423 440 441 444 479 480 481 507 508 509 510 511 512 537 538 540 541 542 543 544 545 546 650 664 665 667 704 710 720 741

Literature

Packaged Weight

Approvals

Ambient Conditions

Power Supply

Control Signal

Angle of Rotation

Running time

Maximum torque