tekmar Zone Control 369

Control Description The Zone Control 369 is a microprocessor-based multi-zone control that can provide indoor temperature feedback to tekmar boiler and mixing outdoor reset controls. The 369 has up to six outputs for either single or two stage heating zones. The 369 can operate zone pumps, electric zone valves or thermal motor zone valves. The 369 has a built-in clock and a separate setback schedule can be set up for each zone with Optimum Start / Stop. The 369 also has a separate system pump and cooling contact.

Literature	—	D 369, U 369, A 369 ’s, D 001, D 070
Control	—	Microprocessor PID control; This is not a safety (limit) control
Packaged Weight	—	3.5 lb.(1610 g), Enclosure A, blue PVC plastic
Dimensions	—	6-5/8" H x 7-9/16" W x 2-13/16" D (170 x 193 x 72 mm)
Approvals	—	CE and CSA C US, meets ICES & FCC regulations for EMI/RFI
Ambient Conditions	—	Indoor use only, 32 to 122°F (0 to 50°C), < 90% RH non-condensing, Altitude <2000 m, Installation Category II, Pollution Category II
Power Supply	—	115 V ±10% 50/60 Hz 600 VA
Relays	—	230 V (ac) 5 A 1/4 hp, pilot duty 240 VA
Sensors Included	—	NTC thermistor, 10 kΩ @ 77°F (25°C ±0.2°C) ß=3892 Outdoor Sensor 070
Optional Devices	—	tekmar type #: 032, 040, 060, 062, 063, 076, 077, 367, 368, 369

Quick
links:

002 003 004 005 007 011 024 031 032 033 039 040 060 062 070 071 072 073 076 077 078 079 080 081 082 083 084 090 092 132 150 152 153 155 156 157 161 162 256 257 260 261 262 263 264 265 268 269 270 279 325 326 335 336 337 345 346 356 360 361 362 363 364 365 369 374 420 421 422 423 440 441 444 479 480 481 507 508 509 510 511 512 537 538 540 541 542 543 544 545 546 650 664 665 667 704 710 720 741

Literature

Control

Packaged Weight

Dimensions

Approvals

Ambient Conditions

Power Supply

Relays

Sensors Included

Optional Devices