tekmar Indoor Sensor 077

Description The tekmar Indoor Sensor 077 includes a 10 kΩ thermistor mounted on a white enamel steel plate to provide an accurate measurement of the indoor temperature. The 077 can be mounted flush onto a standard duplex electrical box. Wiring enters from the back. The 077 can be connected to a 10K Room Temperature Unit (RTU) for remote temperature sensing.

Literature	—	D 074
Packaged Weight	—	0.16 lb. (72 g), baked enamel (white) on steel
Dimensions	—	4-1/2" H x 2-7/8" W x 1/2" D (114 x 73 x 13 mm), 3/16" D (5 mm) when installed
Operating range	—	Splashproof, -60 to 140°F (-50 to 60°C)
Sensor	—	NTC thermistor, 10 kΩ @ 77°F (25°C ±0.2°C), ß=3892
Sensor Leads	—	1‚ (30 cm) 20 AWG, XPE multi strand
Backing	—	1/4" expanded neoprene gasket
Included	—	two 6-32 x 3/4" screws
		two 6-32 x 1/2" white cover plate screws

Quick
links:

002 003 004 005 007 011 024 031 032 033 039 040 060 062 070 071 072 073 076 077 078 079 080 081 082 083 084 090 092 132 150 152 153 155 156 157 161 162 256 257 260 261 262 263 264 265 268 269 270 275 279 325 326 335 336 337 345 346 356 360 361 362 363 364 365 369 374 420 421 422 423 440 441 444 479 480 481 507 508 509 510 511 512 537 538 540 541 542 543 544 545 546 650 664 665 667 704 710 720 741

Literature

Packaged Weight

Dimensions

Operating range

Sensor

Sensor Leads

Backing

Included